©2020 Tango Plans LLC. All rights reserved.
Build the Tango Skiff
PHOTO GALLERY
The original Tango started out with a traditional transom, but performance was dissappointing. I decided to modify the transom and extend the running surface beyond the prop thinking this might keep the stern from digging in and would provide additional buoyancy. Worked like a charm. I was able to get up on plane with just a 3.5hp motor.
Tango 12, built from just sheets of plywood. I added a middle seat so passengers could sit facing forward.
Tango 13, made from 5 sheets of plywood. I couldn't resist adding the steering console but the boat was too small for it and it was later removed.
"Double Take", a Tango 14 built by Jason Chase from Greensboro, NC. Very sharp!
"Wango Tango", a tricked out Tango 14 built by Bill Hunt from SC.
Notice the electronics and all the extra storage which includes an anchor locker and insulated compartment in the bow. Nicely done!
The designer's open cockpit Tango 14.
Tango 15 built by Zoltan Flodung. The first Hungarian "Tango".
Tango 15 with a hardtop! Built by Marc Weniger of Yucaipa, California.
Tango 15 built by Gary Ohmer of Ketchikan, Alaska.
The designer's Tango 14 with center console.
Tango 15 built by Gabriel Ionescu of Romania.
Tango 14 built by Nick Mauro of Venice, FL.
Here's an attractive Tango 15 from the Virgin Islands with an interesting transom modification
A sharp T14 built by Teys Cocset from Britanny, France.
An open cockpit T13 set up for fishing, built by Keith Homan from Long Island.
